The important role of SKF non-standard bearing lubrication in the elimination of the guide

In general, non-standard bearings heat up after they start running, and after a period of time, they are at a lower temperature (usually 10 to 40 degrees higher than room temperature). The normal time is different depending on the size, form, rotation speed, lubrication method of the SKF bearing, and the exothermic conditions around the non-standard bearing. It takes about 20 minutes to several hours.

When the temperature of the non-standard bearing does not reach the normal state and the abnormal temperature rises, the following reasons may be considered. In addition, the machine should be stopped as soon as possible and necessary countermeasures should be taken. Temperature is essential for maintaining the proper life of non-standard bearings and preventing deterioration of lubricating oil. It is recommended to use as much as possible under non-high temperature conditions (generally below 100 degrees). The main cause of abnormal temperature rise is too much or too little. Poor installation of SKF bearings. The internal clearance of non-standard bearings is too small, or the load is too large. The friction of the seal is too large. The lubricant does not match. The creep of the mating surface.

1. Firstly, the parts of the SKF bearing are lubricated to reduce the friction and wear of the bearing;

2. The rolling contact surface of the bearing often forms an appropriate oil film to prolong the fatigue life of the non-standard bearing;

3. The heat generated by friction or other reasons inside the bearing is removed by lubrication;

4. Through lubrication, it can achieve anti-rust and dust-proof effects on non-standard bearings.

Therefore, we must correctly understand the importance of lubrication for SKF bearings, improve bearing performance and reduce consumption.https://www.supplyforever.com/