Nowadays, the application of laser engraving machine is more and more responsive. The laser engraving machine can be seen in various industries. What are the advantages and characteristics of laser engraving machine? The following small series for everyone to sort out some for reference:
1: laser engraving machine engraving materials: wood products, plexiglass, metal plates, glass, stone, crystal, Corian, paper, two-color plate, alumina, leather, resin, spray metal.
2. Dot matrix engraving: dot matrix printing is like high-definition dot matrix printing. The laser head of the laser engraving machine oscillates left and right, each time engraving a line consisting of a series of points, and then the laser head simultaneously moves up and down to engrave a plurality of lines, and finally constitutes a full-page image or text. The scanned graphics, text and vectorized graphics can all be carved using dot matrix.
3. Vector cutting: Unlike dot matrix carving, vector cutting is performed on the outer contour of the graphic. We usually use this mode to perform penetrating cuts on wood, acrylic, paper, etc., as well as marking on a variety of materials.
4. Engraving speed of laser engraving machine: Engraving speed refers to the speed at which the laser head moves, usually expressed by IPS (inches per second), and high speed brings high production efficiency. Speed is also used to control the depth of the cut. For a particular laser intensity, the slower the speed, the greater the depth of the cut or engraving. You can adjust the speed with the engraver panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The advanced motion control system of the Hummer makes you get super-fine engraving quality when carving at high speed.
5. Engraving intensity of laser engraving machine: Engraving intensity refers to the intensity of laser light incident on the surface of the material. For a particular engraving speed, the greater the intensity, the greater the depth of the cut or engraving. You can adjust the intensity with the engraver panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper
6. Laser engraver can adjust the spot size: the laser beam spot size can be adjusted by using different focal length lenses. Small spot lenses are used for high resolution engraving. Large spot lenses are used for lower resolution engraving, but for vector cutting, it is the best choice. The standard configuration for the new device is a 2.0 inch lens. Its spot size is in the middle and is suitable for all kinds of occasions.
