Common aluminum plate engraving machine fault handling method

The aluminum plate engraving machine reminds you that there are several troubleshooting methods for common engraving machines:



First, the inspection steps


1. Is the designed graphic size beyond the processing range?

2. Check if the motor shaft and screw connection line are loose. If so, tighten the screws.

3. Is the machine and computer properly grounded?

4. Whether the current coordinate value exceeds the software limit value range.



Second, non-alarm failure


1. Repeated machining accuracy is not enough, check according to the second item of the first article.

2. The computer is running, the machine does not move, check if the connection between the computer control card and the electrical box is loose. If it is, tighten it and tighten the fixing screw.

3, the machine can not find the signal when returning to the machine origin, check according to the second article. The proximity switch of the mechanical origin is out of order.



Three output failure


1, do not output, please check whether the computer and control box are connected.

2. Open the settings in the engraving manager to see if the space is full, delete the files that are not used in the manager.

3. Is the signal line wiring loose? Check carefully whether each line is connected.



Four engraving failure


1. Is the screw of each part loose?

2. Check if the path you are handling is correct.

3. Whether the file is too large causes the computer to handle errors.

4, increase or decrease the spindle speed to adapt to different materials (generally 8000-24000)

5, loosen the chuck, turn the knife in one direction, put the knife in the right, so as to avoid the engraving object is not clean.

6. Check if the tool is damaged, replace it with a new one, and re-engraving.