Quick engraving is one of the commonly used functions of woodworking engraving machines. Quick engraving is just as fast as engraving. However, the speed is often prone to various problems. In order to ensure the quality requirements and engraving level of the products, we must try our best to avoid mistakes in the rapid engraving. Then we must understand what the problem of rapid engraving is. This leads to the identification of these issues in a targeted manner. Next, follow the CNC network Xiaobian to learn about the quick engraving problem of woodworking engraving machine. How to prevent the problem of rapid engraving problems?
For those irregularly shaped engraved objects, the surface seems to have been fixed very tightly, and will also sway back and forth when subjected to downforce. At this point, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or try to fix the part of the rule and discard its irregular parts.
Check that the pliers or chucks selected for engraving are used incorrectly. At the same time, the wear of the pliers or chucks of the wood engraving machine can also cause the engravings to be misaligned. If the pliers or the chuck is too tight, the moment the blade touches the engraved object will also cause the engraving to pop out.
If the downforce to be engraved is large, consider whether you must use a tapered nose. If the pressure of the engraving machine diamond head moves during the engraving process, the pressure on the side of the tool will cause the engraving to move. . If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knife will drill deep into the material, causing the material to move during the engraving process.
For the engraved plastic pattern, the transfer tape can be attached to the back side of the engraved object, and then the tape-coated side is sprayed with the liquid spray glue, and then attached to a surface that can be discarded, thereby avoiding the use of double-sided tape. It leaves a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved strap, the side of the strap is more viscous than the other side, so the plate can be moved or replaced at will.
Since woodworking engraving machines are often equipped with multi-function pliers or chucks, which are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber pipes for the rubber engraving machine. The fixation of the engraved object will help.
