In the process of using the jade carving machine, one of the three axes can not move, the three axes can not move, the spindle can not operate normally, etc. How to deal with these problems? Next, the engraving machine manufacturer - Warwick CNC, for everyone to summarize the jade carving Machine common problem solving method:
1. One of the three axes cannot move.
At this point, check if the drive block corresponding to the corresponding axis is damaged. The inspection method can use the replacement method: unplug the aviation plug corresponding to the fixed shaft and insert it on the drive block corresponding to the other active shaft.
If the non-moving axis moves normally after the exchange, it indicates that the drive block corresponding to the axis is damaged and the drive block needs to be replaced. If the axis is not moving, it means that the cable or motor is faulty. Replace the cable or motor.
2, the three axes can not move
At this point, check if the three-axis aviation plug is connected to the control box and the control box power is turned on. Whether the data cable is connected to the control box and the control card in the computer mainframe. If all of the above are normal, please contact the factory.
(3) The spindle cannot operate normally
First check the error code displayed on the LED display of the inverter of the jade engraving machine (see the error code item of the inverter manual) and contact the factory.
YIXING series inverter common faults and handling (1.5 kW) fault code: dL output short circuit check motor and cable line short circuit OL1 OL2 load too large motor stall to eliminate blocking phenomenon reduce load LU under voltage input voltage abnormality check input power OH The overheating load is too large. The cooling fan is damaged. Reduce the load and replace the fan. (Note: When the inverter displays DL, the reset button is invalid. Please power off and restart the inverter to eliminate the fault.) TALENT series inverter common faults and handling (2.2 kW) fault code: EOCd output short circuit Check motor and cable line short circuit EOU Input voltage is too high Check voltage EOCn Output circuit phase-to-phase short circuit or short circuit to ground Check wiring and motor ELU Whether there is a large starting current in the same power system Load re-routing avoiding load TL External Dry the control line and the strong power separately. The common faults and handling of the spindle motor:
(1) The motor is hot: check if the pump is working properly.
(2) The motor is not strong: check if the motor line is out of phase, and if the cable is shorted
(3) Motor sound is abnormal: Whether the motor is overloaded or not, the motor is internally faulty (please contact the manufacturer)
(4) Motor reversal: check if the motor line is out of phase.
