The specific introduction of the key function of woodworking engraving machine:
1. Start pause: When the processing file is now loaded, if the system is in a leisure situation, press this button, the system starts running the machining program; if the system is in the processing state, press this button, the system will suspend processing.
2. Suspension: Suspend operation at that time. If the system is in the processing condition, press this button to stop the machining; if the system is in the state of floating and setting the knife, press this button to stop the floating tool.
3. Breakpoint persistence: If the system is in the process pause condition, press this button, the system starts processing at the breakpoint.
4. Connect: Switch user data input to manual connection.
5. Spindle switch: If the spindle is now closed, press this button to open the spindle; otherwise, close the spindle.
6. Return to the origin: Press this button, the system executes the workpiece origin command.
7.×1: Press this button to set the jog step size to 0.01mm.
8.×10: Press this button to set the jog step size to 0.1mm.
9.×100: Press this button to set the jog step size to 1mm.
10.X+: Move the tool in the positive direction of the X axis. If it is in the continuous jog condition, it will be jog in the positive direction of the X axis; otherwise, it will go further in the positive direction of the X axis according to the current step size. Pay attention to:
In the continuous jog condition, press this button, the tool will be jogged at the manual low speed; press and hold the combination of the shift button and this button (press the shift button and press this button, the shift button should not be released at this moment) , the tool is jogged by manual high speed.
11.X-: Move the tool in the negative direction of the X axis. The movement speed and step size and combination key are clarified with the X+ key.
12.Y+: Move the tool in the positive direction of the Y axis. The movement speed and step size and combination key are clarified with the X+ key.
13.Y-: Move the tool in the negative direction of the Y axis. The movement speed and step size and combination key are clarified with the X+ key.
14.Z+: Move the tool in the positive direction of the Z axis. The movement speed and step size and combination key are clarified with the X+ key.
15.Z-: Move the tool in the negative direction of the Z axis. The movement speed and step size and combination key are clarified with the X+ key.
16. Shifting: Pressing this button alone has no function. Just press this button and the combination of other keys to have the corresponding function; the combination of varieties can be seen in other buttons.
17. Tool setting: the second key of the fifth line of the dedicated keypad. Press this button and the system will float.
18.F-: Press this button to decrease the feedrate override.
19.F+: Press this button to add the feedrate override.
